Hi Friends, Caroline here with your monthly sewing tutorial! I am so excited to share with you how to sew your own sewing machine cover today! If you’ve got Little One’s running around OR if you just want your sewing room/space to look “put together” this is the perfect DIY for you. It is SO simple and can really turn your sewing area around!
You’ll need a about 20″ x WOF* of two different fabrics and about 3 yards of ribbon for this project.
Cut both fabric pieces into 20″ x 27″ pieces (the measurements may differ machine to machine) and cut your ribbon into 13.5″ pieces.
Lay one of your fabrics face up and on both long ends find the center and measure to the left 4″ and to the right 4″ place a ribbon on each of these spots and secure with a pin. Then, measure 4″ up from each ends and place a ribbon on these spots and secure them with a pin as well.
Lay your other fabric face down on top of the first fabric and the ribbon. Make sure the ribbons are all tucked in and sew all the way around the edge leaving about a 4″ opening for turning.
Clip your corners and then turn right side out and press.
Top stitch close to the edge where you left your hole for turning.
Slip it over your machine, tie into pretty bows….
And you’re done! Yep. It’s THAT simple!